Operation
Triplematic
32 Triplematic 201708 EN
• OFF to use the regular grinding mode where
only the cutters are sharpened.
3. Set the grinding wheel switch to ON to start
grinding motor.
4. Set the chain pusher switch to ON to start the
feeding of the chain and the movement of the
grinding head. The sharpening will start after
this.
5. Press the reset button when the grinding head
moves downward the first time. This resets the
counter.
6. Wait until the machine has sharpened the
set number of links. When the set number of
links are sharpened, the chain feeding and the
grinding stops.
7. If required: Adjust the settings or reposition
the grinding head on the right or left side to
sharpen a double-link.
Note: Discard the chain when the longest part of the
cutting tooth is shorter than 4 mm, or if you find
cracks or burrs in the chain.
1. Use the first, second and third digit buttons to
set the counter to the number of teeth that still
need to be sharpened on the chain.
See section 4.6.1, “Counter” for more
information about how to set the counter.
Note: Do not use the 3in1 grinding mode when
grinding a brand new chain, e.g. during the first
cycle.
2. Set the 3in1 switch to:
• ON to use the 3in1 grinding mode where all 3
edges (the cutter, the gullet and the depth
gauge) on the cutting links are sharpened.
The edges are sharpened, one after the other,
without interaction from the user.
4 mm