CONFIDENTAL. DO NOT DUPLICATE OR REDISTRIBUTE
17
Pre-Install Guide_2.0.0 | September 11, 2018
PRE-INSTALLATION GUIDE : METAL X SYSTEM
PRE-INSTALL CHECKLIST
SINTER-1
□
Installation location is environmentally controlled for temperature and humidity
□
Move furnace from crate to permanent location / table
□
Appropriate table for furnace
□
Furnace location has adequate space to meet clearance requirements
▷
Location accommodates space to install tube
▷
Location accommodates space to install gas lines
□
Furnace location can support the fully loaded weight of the furnace
□
Furnace location is level
□
Compatible Wi-Fi or Ethernet network connection
□
Dedicated circuit for furnace (see
Facilities Guide
for specifications)
▷
Furnace permanently wired into circuit
□
4” or 6” round exhaust hookup at furnace loc`ation
▷ Measure exhaust and confirm it is at least 100CFM. Record CFM: ________
□
Gas supply panel installed
□
Gas cylinder mounting rack installed
□
Gas cylinders on site
▷ (2) 300cf of mix gas (97.1% Ar, 2.9% H2, UHP [99.999%])
▷ (1) 300cf of backup inert gas (100% Ar, UHP [99.999%])
▷ (1) 230L medium/high pressure cryogenic liquid container of inert gas (100% Ar,
UHP [99.999%]
