CONFIDENTAL. DO NOT DUPLICATE OR REDISTRIBUTE
9
Pre-Install Guide_2.0.0 | September 11, 2018
9
Pre-Install Guide_2.0.0 | September 11, 2018
WASH-1
PRE-INSTALLATION GUIDE : METAL X SYSTEM
WASH-1
1. Place the Wash-1 crate at the center of a 10’x10’
uncrating area to allow full freedom of movement.
2. Unscrew and remove the top and side walls from the
shipping crate.
3. Use a pry bar to remove the wood block securing the
lower portion of the Wash-1 unit. This will enable you
to slide the Wash-1 forward and tip it carefully out of
the crate.
4. Cut the plastic straps securing the Wash-1 to the pallet.
5. Unscrew the plastic/metal tie securing the power cord
to the bottom of the crate, and discard.
