DESKTOP PRINTER QUICK START GUIDE
8
care to
never
leave plastic materials exposed to ambient air, and
always
keep plastic materials in the provided
drybox.
1.
Open your drybox and remove the spindle from the inside. Pull the magnetic spindle cap and spindle body
apart.
2.
After verifying that the plastic filament material bag has no holes, remove the spool from its packaging.
Place the provided desiccant packs in the corners of the drybox.
3.
Place the spindle through the center of the spool of plastic filament and attach the spindle cap such that
the magnets connect.
4.
Place the spool and spindle in the drybox such that filament exits from the
top
of the spool.
Note: The plastic spool is wound under tension. Always hold the plastic against the spool to
prevent unwinding during the loading routine.
5.
Cut the plastic filament at a 45
o
angle.
6.
Insert one end of the plastic feed tube into the adapter on the side of the drybox, then feed the plastic
filament all the way through the tube such that it extends out the other end.
