DESKTOP PRINTER QUICK START GUIDE
14
6.
If the disks over each of the adjustment thumbscrews indicate proper leveling, skip to step 7. If any of your
disks indicate a high or low nozzle, complete the following steps and then re-evaluate your results:
●
Remove the print bed from the printer and use the provided scraper to peel the disks off the print bed
●
Use warm water to clean the glue off of your print bed
●
Reapply glue to the print bed in the same spots as before
●
Run the Shim Bed Level utility again but do not loosen the thumbscrews under the print bed when
prompted to do so. Base your adjustments off of the results of the previous test print
7.
Apply glue to the print bed as shown below.
8.
Re-install the print bed on the printer.
PRINT YOUR FIRST PART - ONLINE VERSION
Note: We recommend that users use the online version of Eiger and print via Wi-Fi or Ethernet, but if
you are unable to connect your printer to Eiger, please see the section titled
Offline Printing
in the
User
Guide
.
Each user has an Eiger
account
belonging to a single Eiger
organization
. You can only use printers registered
to your organization; printers can only belong to only a single Eiger organization.
●
If you have an Eiger account in the appropriate organization, proceed to step 1.
●
If you do not yet have an Eiger account and wish to create a new Eiger organization, navigate to
eiger.io
in
your Google Chrome browser and create a new Eiger account and organization. Proceed to step 2.
●
If you do not yet have an Eiger account and wish to register your printer to an existing Eiger organization,
request that the organization owner add you to the organization. Once you receive your Welcome to Eiger
email, proceed to step 1.
●
In the unusual event that you need to switch organizations before registering your printer, you must
first delete your Eiger account (
Settings > Account Settings > Delete Account
), then follow the
appropriate instructions above.
Note: If you are the only user in the organization, log in to Eiger and delete the organization
(Settings > Organization Settings > Delete Organization), then follow the appropriate
instructions above.
1.
Log in to your Eiger account: navigate to
eiger.io
in your Google Chrome browser and enter your login
credentials.