11
DESKTOP PRINTER QUICK START GUIDE
8.
When the fiber is under tension on the spool, remove the tape from inside the spool and set it aside for
later use. We recommend taping it to the front face of the spool.
9.
At the end of the Load Fiber routine, remove the cut piece of fiber from the print head.
SET UP YOUR PRINT BED
Before printing a part, you will need to level your print bed and apply glue to the region of the bed where the
parts will print. Leveling the print bed provides the best chance of print success and minimizes warping.
Applying glue ensures a well-adhered first layer and allows for easier part removal.
