MARKER ONE m25, Owner'S Manual

Page: 80 / 110

Cobalt_OM_preprint_shell.fm Page 2 Wednesday, March 1, 2006 5:39 AM
MARKER ONE
PLATFORM SERIES
S
ECTION
3
3-28 M25/M27 Owner’s Manual
Tie-down locations are for keeping your Marker
One boat secured when moored. The bow eye
and/or stern eyes can also be used. Refer to
Section 3 , Anchoring .
TOOL KIT - OPTIONAL
A tool kit assists you with correcting minor
mechanical and electrical problems.
STANDARD HEAD OR
OPTIONAL PUMP-OUT HEAD
Before operating the head for the first time, refer to
the marine toilet owner’s manual in your owner’s
packet.
Porta Potti
1. Depress bellows pump to fill the bowl with
water.
2. To flush, pull out slide valve handle located on
front of unit. Depress bellows pump one or
more times until all waste is removed.
3. Close slide valve by pushing handle fully in.
The marine toilet (head) has its own holding tank
that can be emptied manually. If the “pump-out”
option is installed, the waste can be pumped out
through a deck plate fitting marked “WASTE.”
SKI TOW - OPTIONAL
A
WARNING
Avoid injury, death or property damage.
Never anchor a boat from the stern, and
keep the boat headed into the waves.
NOTICE: Only use properly
positioned slings to lift your
boat. Do not use deck cleats to
anchor or for towing. If towing,
only use the bow eye or the
stern eyes in a bridle manner.
NOTICE: Overboard discharge
of waste water should only be
used in approved areas. It is
your responsibility to comply
with local regulations regarding
the discharge of waste.
A
WARNING
Avoid injury or death. DO NOT overload
the ski tow eye or the ski tow pylon, or
use them for anything other than water
sports. The ski tow eye and the ski tow
pylon maximum load is 1,000 lbs (454 kg).