MARKER ONE m25, Owner'S Manual

Page: 102 / 110

Cobalt_OM_preprint_shell.fm Page 2 Wednesday, March 1, 2006 5:39 AM
MARKER ONE
PLATFORM SERIES
S
ECTION
7
7-2 M25/M27 Owner’s Manual
Starting Engine
• Turn battery selector switch(es) to ON.
• Attach lanyard to the engine emergency stop
switch and the operator.
• Make sure shift lever is in the NEUTRAL
position.
• Move throttle lever to the IDLE position.
• Start engine. Operate the engine at 1000 RPM
and check if oil pressure is within specified
range.
Casting Off
• Allow enough room between the boat and the
dock to swing the boat away from the dock.
• Retrieve all mooring lines and fenders.
• Proceed slowly and sound a long blast to alert
other boaters you are leaving.
During Operation
• Check gauges frequently for signs of abnormal
operation.
• Check for excessive vibration.
• Monitor your fuel supply.
• Verify charging of the batteries.
Returning to Port
• Come to a stop a short distance from the dock,
then proceed slowly.
• Have your fenders, mooring lines and the crew
ready.
Stopping the Engine
• Slowly bring the throttle lever to the IDLE
position.
• Move the shift lever to the NEUTRAL position.
• Turn the ignition key to the OFF position.
After Boating
• Turn off all electrical items.
• Check the bilge for water. Operate the bilge
pump, if necessary.
• Fill fuel tank to prevent moisture due to
condensation.
• Lock ignition key switch and remove the
ignition keys.
• Stow and secure all equipment.
• If possible, inspect the pontoons and propellers
for damage.
• Check for fuel, oil and water leaks.
• Clean any spills, stains or moisture from the
boat.
• Turn battery selector switch to the OFF
position.
• Remove any food, garbage and wet gear from
the boat.
• Secure storage areas, hatches and canvas as
equipped.