Markem Imaje 9020, User Manual, Page: 111 / 182

Troubleshooting
A36163-B
111/182
Replacing a gutter
Tools:
0.9 mm Allen key, Markem-Imaje gutter adjustment tool.
CAUTION: The jet must be stopped.
Residual ink may pour out, take appropriate precautions.
Disassembly:
□ Loosen the grub screw on the same side as the gutter to be replaced, by half a turn.
□ Use the gutter adjustment tool to extract the gutter to be replaced.
□ Use make up to clean the port on the recovery unit.
Reassembly:
□ Insert the new gutter in the orifice on the recovery assembly unit and push it fully in.
Testing and adjustment:
□ Set the jet to "adjustment" mode.
□ Use the adjustment tool to adjust the gutter (jet in center of gutter).
□ Tighten the pressure screw moderately.