Mark Levinson ?585, Quick Start Manual

Page: 7 / 18

5 N 0 585 INTEGRATED AMPLIFIER / QUICK-START GUIDE
GETTING STARTED
Display Intensity button: Press this button to change the
intensity of the N
0 585’s front-panel Display characters
and its front-panel LEDs. Multiple presses of the Display
Intensity button cycle through the available brightness
levels: High, Medium, Low, and Off.
Balance button and LED: Press this button to set the left-
to-right channel balance of the Speaker outputs (and the
Line outputs, if you have set them to Variable in the Setup
menu). The Balance LED lights when the balance function
is active.
NOTE: When the balance function is inactive, the
Balance LED remains lit if the left-to-right channel
balance of the Main output connectors is offset.
Mute button and LED: Press this button to mute and unmute
the level of the speaker outputs (and the Line outputs, if you
have set them to
Variable in the Setup menu) by the amount
determined in the Setup menu. The LED lights when the
mute function is active.
Front-Panel display: This 16-character alphanumeric
display provides information about the N
0 585’s operating
status. During normal operation it indicates the name and
volume level of the selected input.
Volume knob: Turn this knob to adjust the volume level
of the Speaker outputs (and of the Line outputs if you have set
them to Variable in the Setup menu). The minimum volume
level is OFF; the maximum volume level is determined in the
Setup menu.
Whenever you select an input the N 0 585 applies the volume
offset selected for it in the Setup menu to the Speaker output
volume level (and to the Line output volume level, if you have
set the Line outputs to Variable in the Setup menu).
Standby button and LED: Press this button to put the N 0 585
into and out of the Standby mode. The LED illuminates
when the N
0 585 is On. When the N 0 585 is in either the
Green, Normal or Power Save Standby mode it flashes
slowly.