4-4
Controls & Modes
Mark Levinson
The
balance
control facilitates precise adjustments in 0.1dB
increments between 0.1dB and 20.0dB. When the balance offset
exceeds 20.0dB, the Nº326S mutes the channel outputting the
lower signal level.
To adjust the left-to-right channel balance of the main output
connectors:
1. Press and release the front panel or remote control
balance
button
to open the
balance
control on the front panel display
as shown to the left.
The front panel
balance LED
lights red to indicate that the
balance
control is open.
2. Rotate the front panel
volume knob
or press the remote
control
volume ± buttons
to make the desired adjustments.
•
Rotate the
volume knob
clockwise or press the
button
to decrease the output level of the left channel.
The
balance
control appears as shown to the left to indicate
that balance is offset in favor of the right channel.
•
Rotate the
volume knob
counterclockwise or press the
volume – button
to decrease the output level of the right
channel. The
balance
control appears as shown to the left
to indicate that balance is offset in favor of the left
channel.
•
Select the 0.0 setting to balance the output levels of the
left and right channels, allowing both channels to output
at the same level. The
balance
control appears as shown
to the left to indicate that balance is centered between the
left and right channels.
3. When the desired adjustments have been made, press and
release the
balance button
to close the
balance
control.
•
Otherwise, the
balance
control automatically closes a few
seconds after the last command is received. If this occurs,
the selected setting is automatically applied.
•
The front panel
balance LED
remains lit if the left-to-right
channel balance of the
main output
connectors is offset.
Note
All Nº326S volume controls, including master volume and
balance
, are deactivated when
SSP mode
(page 4-8) is
activated.
<-- 0.1
-->
<-- 0.0 -->
<-- 0.0 -->
<--
0.1 -->
