21
Rear panel, Nº30.6
1
Single-Ended analog out
These outputs provide single-ended line-level analog audio (via
cables equipped with RCA-type connectors) to a preamplifier, in-
tegrated amplifier, or receiver.
2
balanced analog outputs
These outputs provide balanced line-level analog audio (via cables
equipped with XLR-type connectors) to a preamplifier, integrated
amplifier, or receiver equipped with balanced inputs (see “Set-up
and installation”). The pin assignments used are AES-standard, as
shown below:
Male XLR output
connector (digital)
1 2
3
Pin 1: signal ground
Pin 2: non-inverting signal
Pin 3: inverting signal
Connector ground lug: chassis ground
3
PHASTLink
®
Control ports
In addition to the Mark Levinson Linking system described above,
the Nº30.6 can, as an extra-cost option, support the PHASTLink
®
communications system. This system is designed to facilitate com-
plete systems integration with PHAST
®
controllers. For more in-
formation on PHAST
®
(a division of AMX
®
), please refer to the
internet at
http://www.phast.com.
4
analog dc in
These inputs, one for each channel, accept DC power from the
PLS-330 (via the supplied cables equipped with five-pin connec-
tors).
Connect the left channel’s
analog dc in
on the rear panel of the
Nº30.6 to the
left analog dc out
on the rear panel of the PLS-
330; likewise, connect the right channel’s
analog dc in
on the
rear panel of the Nº30.6 to the
right analog dc out
on the rear
panel of the PLS-330.
