7
Operating Voltage
The PLS-330 is set at the factory (internally) for 100V, 120V, 220V,
230V, or 240V AC mains operation at either 50 or 60Hz. (
230V/50Hz
only in European Union countries, in compliance with CE regulations.
)
This voltage setting cannot be changed by the user. Make sure that the
label on the rear panel of the PLS-330 (above the AC cord) indicates
the correct AC operating voltage for your location.
If the voltage indicated on your PLS-330 is incorrect, or if you wish to
change the AC operating voltage of your Nº30.6/PLS-330 as the result
of moving to a different country than the one in which you purchased
your digital audio processor, see your Mark Levinson dealer.
The Nº30.6/PLS-330 can be powered by a normal 15-ampere AC mains
line. If other devices are also powered from the same AC line, their ad-
ditional power consumption should be taken into account.
For optimal sonic performance and longevity, the Nº30.6 is designed to
remain powered at all times (the
standby
switch merely mutes the
processor’s outputs and turns off the display). There is an initial break-
in period of approximately 300 hours before the Nº30.6 achieves opti-
mum performance.
