BULLETSENSE 1050/RL1100 INSTRUCTION MANUAL VERSION 1.2
8
5.
Using the brass thumbscrew beneath the laser assembly, coarse adjust the laser housing so the
laser hits the middle of the tube with the mirror mount.
Figure 7: Station 8 Setup
6.
Adjust Laser beam onto the mirror with the 2X 6-32 set screws on the top of the assembly.
Once the Laser diode is hitting the mirror surface. Rotate the mirror so the laser beam is
reflected back to the sensor main body. Once the reflected laser beam appears on the sensor
main body, continue adjusting the set screws to direct the laser beam into the sensor hole as
shown in the following figures.
