BULLETSENSE 1050/RL1100 INSTRUCTION MANUAL VERSION 1.2
7
Figure 6: Mounting station 8 adapter to the RL1100 frame.
3.
Slide the mirror onto the rod in the orientation shown in Figure 6. Gently tighten the set screw
to hold the assembly in place until the next step. The mirror needs to be aligned with the diode
so keep the mount snug but not fully tight at this stage.
WARNING
–
Class 3R laser: avoid eye contact at all times; do not look directly into the laser when
adjusting the laser alignment.
4.
Power on the console which will automatically turn on the laser. Next step is to align the laser
so the mirror reflects the laser beam into the sensor. When you first power on the sensor, look
at the mirror to see where the laser beam is directed. Use a white card to help find the exact
position if it’s difficult to detect the position.
Slide mirror
assembly
onto the rod
