Maritime Geothermal WH-Series, Installation And Service Manual

Page: 20 / 77

Page 20 002028MAN-01 1-Oct-2015
NOTE: Before using the PC Application refer to Appendices B and C for installation instructions for the PC Application and
USB driver for the com port. Both must be installed in order to run the PC APP and communicate with the control board.
Connect a USB cable between the PC and the control board USB connector located at the bottom center of the board. Double click
on the NordicGEN2Vx.xx application to launch the PC APP. You should see a screen similar to the one below. The revision of the
PC APP is shown in the top left corner of the screen. Click the
Connect button to begin communications with the control board.
PC Application (PC APP)
Once connected, the menus and buttons will become accessible, the number of Objects available and Read should appear (they
should be the same) and the Polling LED will begin to flash. The PC time and date will appear at the bottom left corner of the screen.
Clicking on “Control Board Date and Time” will display the current control board date and time. If the date and time need to be adjust-
ed, click on menu
Tools—Set Date and Time . The control board date and time will be set to that of the PC.
PC APPLICATION MENUS
The following pages describe the PC APP’s menus in detail. There are five main menus: File, View, Graphs, Tools, Help .
File Menu: This menu handles page arrangements. If one or multiple pages are open and arranged as desired for viewing, this page
arrangement may be saved and re-used the next time the PC APP is used.
File—Open : Opens a saved page arrangement.
File—Save : Saves the current page arrangement under the current name.
File—Save As : Save the current page arrangement under a new name.
File—Exit : Exits the PC Application.
Windows Menu: This menu is used to arrange windows (pages), or to bring a particular window to the front.
Windows—Cascade: Arranges windows one in front of the other each with a small right and down offset from the last.
Windows—Tile Vertical: Arranges windows side by side, stretching them fully from top to bottom.
Windows—Tile Horizontal: Arranges windows up and down, stretching them fully from left to right
Windows—Close All: Closes all open windows.
Windows— Window Name: Brings the named open window to the front.
Help Menu: This simply shows information about the PC Application.
Help—About : Displays the window shown to the right.