12
1. Make sure Drain Valve is closed.
2. Fill display tank half full.
3. Start system. Plug power cord into 110-120v dedicated outlet and turn switch on.
Never attempt to plug in unit unless hands and plug are absolutely dry
.
4. Fill remainder of tank to within one inch
of the bottom of the top frame. Carbon and
dolomite dust may cause some cloudiness.
This will clear in a few hours.
NOTE: Never allow water level to go
below Water Level Line on side glass.
SYSTEM STARTUP
For Saltwater Systems Only:
Add the required amount
of powdered sea salt mix to tank (table below). Save the
remainder to adjust salinity at a later time.
Model
Salt Required (approximate)
ML-22
14 lbs.
ML-24
28 lbs.
ML-26
48 lbs.
ML-44
60 lbs.
ML-56
96 lbs.
NOTE: When filling tank, run cold water
through salt to dissolve it faster.
