21
20
Clean Protein Skimmer Froth Cup/Foam Separator.
To ensure proper operation, Froth Cup and Foam Separator should be cleaned every
week with warm water.
To remove Froth Cup and Foam Separator:
1.
Turn off system.
2. Remove Filtration Module Cover.
3. Remove Upper Media Tray. Set aside.
4. Remove Protein Skimmer Drain Hose
from Drain Port.
5. Remove (lift up) Froth Cup from
Contact Chamber.
6. Clean Froth Cup and Foam Separator.
7. Return Cup and Separator to position atop Contact
Chamber.
NOTE: Make sure that good seal forms
around Cup and Chamber.
8. Reconnect Protein Skimmer Drain Hose.
9. Turn system on. Inspect Skimmer for leaks.
10. Replace Filtration Module.
11. Restart system.
Every three to six months
Clean Refrigeration Unit Condenser Intake Screen.
To guard against overheating and system failure, the Refrigeration Condenser Intake Screen
should be brushed or vacuumed clean.This eliminates accumulated dust and prevents clogging.
As needed
Replace the Fluorescent Display Lamp (optional).
1.
Dry hands thoroughly.
2.
Turn power switch off on step-down transformer (A). Disconnect color-coded
leads with ring terminals (B).
3.
To remove endcap, remove upper and
lower endcap screws.
A
B
4. Slide lamp out from outer housing.
