11
If you intend to connect a condenser-microphone
to the UCON CX, you may turn on the needed
phantom-power with the “PHATOM”-button, on
the front of the UCON. Though turned on,
dynamic microphones can be connected parallel
to condenser microphones. Next to each
microphone plug there is a ”-20dB”-switch.
Pushing it will lower the level of a connected
signal prior the pre-amp by 20dB. This is mostly
needed for line signals and if an input signal is
still distorted, even though the gain knob within
the Mixer is pulled down completely. On the
front of the UCON CX there is also the knob
“Phones” for adjusting the volume of the
headphone output.
Z
When connecting an
unbalanced signal, the
level decrease will be
only 10 dB.
Summary of Contents for UCON CX
