MAREX 373 Aft Cabin Cruiser
Page
40 of
66
Use start-cables without spark protection/ignition protection. This can
damage the electronic system for the engines!
Read the instruction manual for the battery charger
Some models have a red diode light ignited when the shore connection is in use.
(D)
DANGER
Do not let the shore-connection-cable fall into the water. This can cause
DAMAGE AND DEATH!
An electric field can be created and is a danger to life.
Read this again!
(D)
To minimize the danger of shock and fire:
Turn off the switch to the shore connection in the boat before any
connection or disconnection of the cable power
Always
Plug/connect the boat first and then the electric circuit on
land.
Always disconnect
/
unplug on land and then on the boat.
Make sure the cover of the plug is in use.
Do not change the connections in the systems
Use only certified cable.
Use grounding cables (green or green with yellow stripe) on metal
covers on the 220V electric equipment.
0.1.11 Maintenance and controlling
(D)
When the boat is connected to shore power, the ZINC anodes must be
controlled often
. (Seen on top of the flounder on the z-drive- over the propeller)
When 220V is plugged in, the red LED light is
on.
Always plug the connection to the boat first and
disconnect it after disconnecting on land.
