MAREX 373 Aft Cabin Cruiser
Page
58 of
66
*)
Adjustments on the engine feet/fundaments must only be performed by authorized
personnel. The bolts are glued to the fundaments. By any adjustments you will
damage the glue. If the feet/bolts are loose, contact a serviceman immediately.
Section 7.02
0.53 Preparing the engine and the drive
Control the new oil level (the oil must be changed). See the engine
producer’s manual.
Control the new gear oil level (the oil must be changed). See the engine
producer’s manual.
Control the fuel filter and change it if necessary. Control the fuel system
and fasten all couplings and fittings. Check the water separator. Look for any
damages or leakages or potential hazard. See the engine
producer’s manual.
Check the trough hull fitting at the shaft and its oil level. Control all couplings
and fittings.
Check the propeller, the propeller nut and the splint pin.
Section 7.03
0.54 Preparing the steering
Check the steering function, before the boat is placed on water.
Section 7.04
0.55 Other installations
Cleaning the canopy: See the suppliers manual in divider 4.
Clean all textiles according to the manuals.
