Revision 1.0
Page 1
1 General
1.1
Introduction
Congratulations on your purchase of the Maretron TSM1330C Vessel Monitoring and Control
Touchscreen. Maretron has designed and built your display to the highest standards for years of
dependable and accurate service.
The TSM1330C is an 13.3
” dedicated touchscreen that includes Maretron’s N2KView
®
vessel
monitoring and control software. The N2KView
®
software allows you to configure as many favorite
screens as you want with exactly the information you want to see. The TSM1330C provides an
extremely simple touch interface for monitoring and controlling critical systems from anywhere on the
vessel.
The TSM1330C is ruggedized for marine use and includes a solid state disk drive to withstand the
pounding associated with waves. And since the TSM1330C only dissipates 20 watts, there is no need
for internal cooling fans that are noisy and wear out causing electronics to overheat and fail. The
TSM1330C can be mounted outside given the high bright screen and waterproof front.
As an alternative to controlling the TSM1330C through the touch screen, the TSM1330C includes two
USB ports for connecting keyboards, mice, or trackballs. The TSM1330C also has an Ethernet port
for connecting Internet Protocol (IP) cameras for viewing within the N2KView
®
software. Lastly, the
TSM1330C contains two completely isolated CAN bus connectors (M12) for easy connection to single
or redundant NMEA 2000
®
networks.
The Maretron TSM1330C is designed to operate within the harsh demands of the marine
environment. However, no piece of marine electronic equipment can function properly unless
installed, configured, and maintained in the correct manner. Please read carefully and follow these
Figure 1
– TSM1330C Network Diagram
Optional
USB Keyboard
Or Mouse
Engine
Monitor
Battery
Monitor
Electrical
Panel
Tank
Monitor
NMEA 2000
Network
TSM1330C