Revision 1.0
Page 15
Figure 11
– TSM1330C Startup Screen
The first time you start the TSM1330C, N2KView
®
will ask you to assign it a unique name. Assigning
a unique name to the TSM1330C is necessary in order to help you determine the source of alerts
generated by a TSM1330C or other Maretron device capable of generating alerts.
You are required to press
Accept
and thereby acknowledge this warning message before N2KView
®
will run in Live Mode.
Alternatively, you may
Enter Demo Mode
. In Demo Mode, you will not be able to connect to an
NMEA 2000
®
network and view live data; instead, simulated data will be provided to stimulate the
controls.
Finally, you may choose
Exit
, in which case the TSM1330C will power off.
2.6.1 Manually Entering LAN Connection Information
NOTE
The LAN Connection is not necessary unless you are using any of the following
features:
Video
E-mail actions on Alerts
If you intend to use the Video feature or send e-mails via the Alerts feature, you must ensure that the
device can connect to your LAN (local area network). The TSM1330C comes from the factory