TSM1330C User's Manual
Page 14
Revision 1.0
Figure 10
– NMEA 2000
®
Connector Face Views
2.5
Power Sequencing
When the TSM1330C is connected to an appropriate power source, you can use the power switch
located on the front panel to turn the TSM1330C on or off. If the TSM1330C is turned on, then the
switches found on the front panel will be illuminated. If the power switch is pushed to power down the
TSM1330C, the front panel switches will be dark.
The TSM1330C can also be switched on and off by applying or removing power through an external
switch or breaker. Anytime the power is reapplied to the TSM1330C, it will turn on.
The red LED on the front panel will illuminate anytime power is supplied to the TSM1330C.
2.6
Configuring the TSM1330C
In order to use the TSM1330C, you must already have N2KServer
®
installed and running on either a
Windows PC or on a Maretron IPG100 Internet Protocol Gateway.
You must also have some information as to the configuration of your local area network.
The TSM1330C will start up with the following warning screen: