Mareli Systems ECOSTAR 12, Assembly And Exploitation Manual

Page: 25 / 36

25
Mareli Systems
CHRONO
This Manu allows selecting the programming modalities and and the Ignition/Extinguishing time slots.
Disable
Daily
Weekly
Week
-
End
Modality - It allows selecting the disired modality, or disable all set programming.
1. Enter modification mode through the key
P3
.
2. Select the chosen modality (Daily, Weekly or Week end).
3. Enable/disable chrono modality through the keys P2 .
4. Save the settings through the keys
P3
.
Programming
The system includes three type of programming: Daily, Weekly, Week end.
After selecting the desired kind of programming:
1. Select the programming time through the keys
P4/P6
.
2. Enterthe adjustment modality (selected time will be flashing) through the keys
P3
.
3. Change the time via keys P4/P6 .
4. Save the programmong with the keys
P3
.
5. Enable (a “V” is displayed) or disable the time slot (a “V” is not displayed”) by
pressing the keys P5 .
Daily
Select the day of the week to program and set the ignition and extinguishing times.
Programs around midnight
Set the clock On of the previous day at the desired time: Ex. 20.30
Set the clock of OFF of the previous day at: 23:59
Set the clock On of the following day at 00:00
Set the clock of OFF of the following day at the desired time: Ex. 6:30
The system turns on at 20.30 on Tuesday and turns off at 6.30 on Wednesday
Weekly
The programs are the same for all days of the week.
Week-end
Choose between 'Monday-Friday' and 'Saturday-Sunday' and then set the switching
on and off times.
Monday
ON OFF
09:30 11:15 V
00:00 00:00
00:00 00:00
Monday ____________
Tuesday
Wednesday
Thrusday
Friday
Mon-Fri
Sat-Sun
USER MENU 2
Menu is accessed by pressing the P3 buttons for 3 seconds .
Settings
Time and Date
- Used to set the day, month, year and current time.
Language
- Menu to modify the language of the LCD board.
Display Menu
Contrast
- Menu used to regulate the display contrast.
Brightness -
It allows you to adjust the screen brightness.
Minimum Brightness - Menu used to regulate the lighting of the display when the command aren’t used.
Keyboard Address - This Menu is protected by a password (the password is 1810), that allows you to set the RS485
node address. With the bus 485 it is not possible to have more nodes with the same address.
Sound - It allows you to enable or disable sound from the control panel.
Node List - This menu shows: communication address of the board, typology of the board, firmware code and
firmware version. Data are not modifiable. The typologies of board that can appear are:
MSTR - Master; INP - Input ; KEYB - Keyboard; OUT - Output;
CMPS - Composite; SENS - Sensor; COM - Communication;
Acoustic Alarm
- It allows to enable or disable the acoustic alarm of the keyboard.
Auger Calibration -
It allows to modify the value set in firm of Auger’s speed or On times. The values are in the
range – 7 ÷ 7. The firm’s value is 0.
Fan Calibration - It allows to modify the value set in firm of Combustion Fan’s speed. The values are in the range
– 7 ÷ 7. The firm’s value is 0.
Summer-Winter -
This Menu allows you to modify the hydraulic plant functioning depending on the season.