STEP 3 (See Diagram 3)
A.) Attach the Front Press Base (#2) to the Upper Frame (#1). Secure it with one 6
¾” Front Press Base Axle (#29), two Ø 1 ¼” Washers (#70), and two M10
Aircraft Nuts (#109).
B.) Attach the Front Press (#3) to the Front Press Base. Secure it with one 7 ½”
Front Press Axle (#30), two Ø1 ¼” Washers (#70), and two M10 Aircraft Nuts
(#109).
C.) Thread the 4” T-shaped Lock Pin (#78) into the hole on the Front Press to
obtain the desired Front Press position.
D.) Attach the Backrest Board (#89) to the Backrest Support Frame (#5). Secure it
with two M8 x 1 5/8” Allen Bolts (#113) and Ø 5/8” Washers (#112).
E.) Attach the Backrest Support Frame (#5) to the Vertical Frame (#4). Secure it
with one M10 x 4 ¼” Allen Bolt (#95), two
∅
¾” Washers (#111), and one M10
Aircraft Nut (#109).
F.) Thread the 6 ¼” T-shaped Lock Pin (#77) into the hole on the side of the
Vertical Frame to obtain the desired Backrest position.
10
Summary of Contents for PLATINUM MP-3500
