background image

Visit our website at

www.freemotionfitness.com

CAUTION

Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.

Model No. GZFM6006.4
Serial No. 

Write the serial number in the
space above for future reference.

Serial Number Decal 

(inside tower)

QUESTIONS?

At FreeMotion Fitness, we’re
committed to providing com-
plete customer satisfaction. If
you have questions, see HOW
TO CONTACT CUSTOMER
CARE on the back cover of this
manual.

OWNER’S MANUAL

Part No. GZ7266 R0205A

Printed in USA © 2005 ICON IP, Inc.

If you have questions after reading this manual, or if you require assistance, please contact Customer Care at
the address and phone number listed below. Please be prepared to give the following information:

• The MODEL NUMBER of the product (GZFM6006.4)

• The NAME of the product (FREEMOTION

®

CABLE CROSS strength machine)

• The SERIAL NUMBER of the product (see the front cover of this manual)

When ordering replacement parts, please also give the KEY NUMBER and DESCRIPTION of the part(s) (see
the PART LIST and the EXPLODED DRAWING on pages 11 to 13 of this manual).

HOW TO CONTACT CUSTOMER CARE

Customer Care: 1-800-201-2109, Monday–Friday, 8 a.m.–5 p.m. Mountain Time

FreeMotion Fitness, Inc. • 1096 Elkton Drive, Suite 600 • Colorado Springs, CO 80907

Summary of Contents for GZFM6006.4









Reviews: