STEP 2 (See Diagram 2)
A.) Attach the Upper Frame (#1) onto the two Guide Rods (#17). Secure it with two M10 x
¾” Allen Bolts (#103) and
∅
¾” Washers (#111). DO NOT tighten the Bolts yet.
B.) Place the Upper Frame onto the Vertical Frame (#4). Secure it with two M10 x 2 5/8”
Carriage Bolts (#106), one 4 ¾” x 2 ¾” Bracket (#25), two
∅
¾” Washers (#111), and
two M10 Aircraft Nuts (#109).
C.) Securely tighten all Nuts and Bolts previously installed in Step-1 and Step-2.
D.) Attach the Seat Support Frame (#7) to the Vertical Frame (#4). Secure it with two M10 x
2 5/8” Carriage Bolts (#106), one 4 ¾” x 2 ¾” Bracket (#25), two
∅
¾” Washers (#111),
and two M10 Aircraft Nuts (#109).
E.) Attach the Leg Developer (#8) to the bracket on the Seat Support Frame. Secure it with
one Leg Developer Axle (#19), two M10 x ¾” Allen Bolts (#103), and two Ø ¾” Washers
(#111). Do not over tighten the Bolts. Make sure the Leg Developer is able to swivel.
DIAGRAM 2
9
Summary of Contents for PLATINUM MP-3500
