Marconi LORAIN RHM800E50, Manual

Page: 49 / 74

1. SPECIFICATION
I GENERAL: This is designed to power a load while charging a battery in a positive grounded
system. This is listed by Underwriters Laboratories under standard 1012 for power conversion equip-
ment in a controlled environment.
1.2 OUTPUT RATINGS
12.1 Voltage: Float is adjustable from to 54 volts for 23 or 24 cells of battery,
voltage is adjustable from float voltage to 57 for equalizing 23 or 24 cells of battery. A front panel
mounted selects float or operation.
1.2.2
Regulation
(A) Static: Steady state output voltage % of any the range of 48.3 to
55 for any load current from no load to full load for the input voltage and frequency spec-
ified.
(B) Temperature Coefficient: Output voltage change does not exceed an average of 0.01% per degree
C the ambient temperature of 0” C to C. Refer to paragraph 1
(C) Dynamic: For a step change of 250 amps the range of 5% to 100% of full load, the max-
imum voltage transient does not exceed 5% of the steady state voltage. Recovery to within
steady state does not exceed 200 milliseconds and all transient behavior
disappears 500 milliseconds. Refer to paragraph
1 . 2 . 3
When mnnacted to a battery rated in ampere-hours four times the full load current rating of rectifier.
(A) voice band noise is less than 32 dbm wlth C-message weighting
(B) wide band noise does not exceed 500 MV peak to peak or 30 MV RMS over the frequency range of
10 to 14 paragraph
1 2 . 4
RELTEC”
to current software format.
POWER DATA
Updated Dimensions and Installers
pages to include
. Added Notes
Model
4.24 and 4.25.
0
Rectifier
SPEC. NO. 548502500
P D 5 4 8 5 0 2 5 0 0