17
Monitoring a Single Pet
To begin monitoring your pet and receive alarm notifications if they move
outside of your selected boundary area, press the Pet button over the pet’s name
twice. This will cause the word Monitor to flash. You can press Select to start
monitor mode immediately or simply wait 5 seconds and the locator will enter
monitoring mode automatically. Once the monitoring mode has been started the
display will appear as shown in Figure 13.
Monitoring mode begins just like tracking mode by searching for the selected
pet’s tag. Once the searching operation is successful (10 to 30 seconds) the
display will appear as shown in Figure 14.
Figure 13
Starting Monitor Mode
Figure 14
Monitor Mode – Pet 1
Tag Icon Flashes
Every 7 Seconds
Flashing
