Marco Polo ETP-LOC-01, Operating Instructions Manual

Page: 13 / 28

9
This searching transmission will continue until one of these events has occurred:
1. The tag responds
2. The operation is canceled as described below
3. Two minutes have elapsed without a response from the tag
The first time you attempt to search for your pet’s tag do so with the pet nearby,
somewhere in your house or yard where you know the signal will be received.
This way you can practice with the locator and know what to expect if an
emergency arises. Normally, the tag will respond to the searching signal within
30 seconds but in some cases it can take up to a minute. If your pet’s tag does not
respond
within a minute then make certain it is turned on and review the
information on “Pairing a Tag and Locator” above if necessary. If the searching
operation times out after two minutes the locator will begin beeping, the
Searching icon will disappear and the display will show “No Signal”. Pressing
the select button again will restart the search operation for another 2 minutes.
Once the tag does respond the locator will beep and the display will appear as
shown in Figure 8.
If you wish to cancel a searching operation then press the Pet button twice until
both Track and Monitor disappear from the display.
Tracking
Once the searching operation has been successful the tracking display will appear
as shown in Figure 8.
Tag Icon Flashes Each Time
the Pet’s Tag Responds
Signal Strength
Percentage
(Higher = Closer)
Range Bars
(More Bars = Closer)
Directional Arrow Points in
the Direction of Your Pet
Figure 8
Tracking Display