User Manual version 2503
LIBRA 120 III (PC620 Intel 815E)
5-85
u
QUICK POWER ON SELF TEST
This category speeds up Power on Self Test (POST) after you
power up the computer. If it is set to
Enable
, BIOS will
shorten or skip some check items during POST.
Enabled:
Enable quick POST
Disabled:
Normal POST
u
FIRST/SECOND/THIRD/OTHER BOOT DEVICE
The BIOS attempts to load the operating system from the
devices in the sequence selected in these items.
The Choice:
Floppy, LS/ZIP, HDD, SCSI, CDROM & Disabled
.
The choice:
Enabled
&
Disabled
.
u
SWAP FLOPPY DRIVE
If the system has two floppy drives, you can swap the logical
drive name assignments.
The choice:
Enabled
&
Disabled
.
u
BOOT UP FLOPPY SEEK
This category seeks disk drives during boot up. Disabling
speeds boot up.
The choice:
Enabled
&
Disabled
.
u
BOOT UP NUMLOCK STATUS
This category selects power on state for NumLock.
The choice:
Enabled
&
Disabled
.
u
GATE A20 OPTION
Select this category if chipset or keyboard controller should
control GateA20.
Normal A pin in the keyboard controller controls GateA20
Fast Lets chipset control GateA20
u
TYPEMATIC RATE SETTING
Keystrokes repeat at a rate determined by the keyboard
controller.
When
enabled
, the typematic rate and typematic delay can
be selected.
The choice:
Enabled
&
Disabled
.
PDF created with pdfFactory trial version
www.pdffactory.com
