background image

8716P Hybrid NVR Installation Guide

5

Chapter 1

Mandatory Regulations

You must be familiar with the following mandatory regulations governing the product’s operations. 
You should also adhere to these instructions to ensure the installation meets regulatory compliance.

Regulatory Compliance Statements

Canada - Industry Canada

This Class A digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (A)/NMB-3(A)

United States - Federal Communications Commission

Supplier’s Declaration of Conformity

Product Name:

    Hybrid NVR

Product Model:

   HNVR MS

Company Name:

   March Networks Inc.

The Pinnacle Building
3455 Peachtree Road North East, Suite 500
Atlanta, Georgia 30326
1 800 563 5564

1

This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy, and if not installed and used in 
accordance with the installation guide, is liable to cause harmful interference to radio 
communications. Operation of this equipment in a residential area is likely to cause harmful 
interference, in which case users will be required to correct the interference at their own 
expense. Modifications not expressly approved by the manufacturer could void the user's 
authority to operated the equipment under FCC rules.

2

This device complies with part 15 of the FCC rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause undesired operation.

Europe

This equipment complies with the following EU directives: 2014/30/EU, 2014/35/EU, and 
2011/65/EU. A Declaration of Conformity is available upon request.

Summary of Contents for 8716P Hybrid NVR





































Reviews: