8716P Hybrid NVR Installation Guide
34
Unit Setup
Ensure that both cables are connected to the main PCBA, as shown in the photo below.
7
Install the hard drive bracket in the recorder unit and secure the bracket with the four screws at
the bottom. The data cable and power cable connections of the hard drives must face the left
side of the recorder.
8
When all the hard drives that you require are installed, replace the cover of the recorder unit
and secure it with the three (3) screws. Use 3.0 in-lbs (inch pounds) of torque.
Data cable for
Power cable
Power cable
Data cable for
hard drive in position 1
hard drive in position 2
Power cable
in PCBA
Data cable 1
in PCBA
Data cable 2
in PCBA
