8716P Hybrid NVR Installation Guide
32
Unit Setup
3
Remove the cover of the recorder.
There are two hard drive positions in one hard drive tray.
Position 1 is at the top of the hard drive tray, position 2 is at the bottom of the tray (underneath
the top hard drive).
The following illustration shows the hard drives in the unit with two hard drives installed.
4
Loosen the four screws at the bottom of the hard drive bracket (two each side) and remove it
from the recorder.
Note:
Set the screws aside - you will use them to re-attach the bracket.
Position 2 is not visible, as it is
Hard drive in position 1 (top).
under the top hard drive, at the
bottom of the tray.
2 visible screws for
bottom of bracket
(bracket removed)
