30
Step by Step Connecting With Windows XP
Before connecting to you SNMP card be sure you have one of the following.
1. Ethernet crossover cable.
2. Or Switch or hub and two Ethernet straight through Ethernet cables.
3. Or Computer that has an AutoLink networking port.
(An AutoLink port will determine if you are connecting to a device that requires a crossover
cable or a straight through cable and automatically transmit and receive using the correct
connection.)
Record the settings that are already displayed before you change anything. Failure to
return these setting back to “normal” could result in you not being able to connect to your
usual network.
STEP 1:
Go to the control Panel.
STEP 2:
Double click on the Local Area Connection or Right click on the Local Area.
Connection that you are using to connect to the NetPower Card, click Properties.
ATTENTION!