Marathon Technologies Corporation
23
2.
On the
Configure CoServer Link1
page, highlight the adapter you wish
to assign as CoServer Link1 in the
Connection
column. Select the
adapter based upon the PCI location-to-switchbay mapping you estab-
lished during planning and preparation. You can use Table 1 to assign IP
addresses for internal CLink connections.
Note:
When installing multiple blade pairs, the first blade pair will have
the same IP for both the default IP and the currently configured
IP. This will not be the case for subsequent blade pairs.
TABLE 1.
Suggested CoServer1 CLink IP Addresses
Blade Pair 1
Blade Pair 2
Blade Pair 3
CoServer1
CoServer2
CoServer1
CoServer2
CoServer1
CoServer2
CSLink1
192.168.3.1
192.168.3.2
192.168.13.1
192.168.13.2
192.168.23.1
192.168.23.2
CSLink2
192.168.4.1
192.168.4.2
192.168.14.1
192.168.14.2
192.168.24.1
192.168.24.2
