Marathon Power SNMP Series User Manual Download Page 5

Page: 5 / 57

Test Log - UPS Testing (CY54-03 Model Only) ......................................... 30
Critical Battery Capacity (%) (Only Available on the CY54-03 Model) ....... 30

UPS On/Off Schedule (Only Available on the CY54-03 Model) ........................ 30

Wake On Lan (Only Available on the CY54-03 Model) .............................. 30
Warning Threshold Levels (Only Available on the CY54-03 Model) .......... 31

UPS Configuration (CY54-04 Model) ................................................................ 32

UPS Properties .......................................................................................... 32
Test Log (CY54-04 Model) ........................................................................ 34

Maintenance (Only Available on the CY54-04 Model) ...................................... 34

Transfer Points (Only Available on the CY54-04 Model) .................................. 35

Transfer Point Descriptions (CY54-04 Model) ........................................... 36
Default Transfer Point Settings (CY54-04 Model) ...................................... 37

Rebooting the UPS (TRTC Series UPSs) ......................................................... 37

The same procedure above can be rebooted using the front panel controls
on the UPS. ............................................................................................... 37

Network ............................................................................................................. 38

Summary of Contents for SNMP Series


























































Search results

Summary of Contents for SNMP Series

Reviews:

Related manuals for SNMP Series

Brands by name

Popular brands

Marathon Power SNMP Series, User Manual

Search results

Summary of Contents for SNMP Series

Reviews:

Related manuals for SNMP Series

Brands by name

Popular brands