41
SNMPv1 & SNMPv2 or SNMPv3
Select between SNMPv1& SNMPv2 or SNMPv3. When selecting All or SNMPv3, a user
name, password, authentication, and privacy are required.
Community
This section is to set a Community name for NMS. The community name has to be the
same as the setting in NMS. (Default is public)
Permission
This section is to set authorities of administrators. The options are Read, Read/Write,
and No Access.
TRAP Notifications
Destination IP Address
Set the receiver’s ’IP address for receiving TRAPs sent by the card. It is valid for up to 8
IP Addresses.
Accept
Select the TRAP type from the drop-down list. When SNMPv3 TRAP or SNMPv3 Inform
is selected, username/password and authentication information are required.
Community
TRAP receiver and the card must have the same community. (Default is public)
MIB Type
PPC MIB is the default. RFC1628 MIB NOT recommended.
MIB files are available by contacting Marathon Power at
Severity
This section sets the TRAP level for each receiver. There are three levels of Severity,
1. Information: To receive all the TRAPs.
2. Warning: To receive only the warning TRAPs.
3. Severe: To receive only the severe TRAPs. (Please refer to your NMS manual for
TRAP levels.)
Description
This is to make a note for an administrator’s ’reference.
