ENGLISH
8
RX9001 User Guide
Use standard wiring and Phoenix
connectors.
Tip
In case you experience communication
problems when using the RS232 wiring
solution illustrated above, make sure
that the GND pin on the Extender is
grounded correctly on the side of the
A/V component.
Connecting to a Lutron RadioRa Lighting System
1
Connect
the Lutron Lighting System to the Extender via the RS232 port. Refer to
chapter
‘Connecting to Serial Equipment’
on
page 7
.
2
Open
Wizz.it Ex
.
3
Open the
configuration file
.
4
Insert the
Lutron Lighting System
in the configuration file.
Note
If there are multiple Extenders, add these Extenders to the configuration file via the
System properties
before configuring the Lutron Lighting System.
5
Open the
Lutron Lighting System Properties
.
6
Adjust the
settings
of the Lutron Lighting System:
1
Select the Extender to which the Lutron Lighting System is connected.
2
Select the port on the Extender to which it is connected.
Extender
A/V component
RX9001_SG_EFS.qxd 29-03-2007 16:29 Pagina 11
Summary of Contents for RX9001
