4
MENU “Input A/B/C” Input Channels Editing [Access by pushing the “A/B/C” buttons]
NAV/PM1 Encoder
NAV/PM1 Enc.
PM2
Enc.
PM3 Enc.
[to navigate between menus]
[to chose values for the parameters, no need to confirm the chosen values,
which are automatically loaded during the encoders use]
1. Input A/B/C
N Gate
Noise Gate = Off
->
Noise Gate = Off
PM1 N/A
Off
Same as PM2
On
2. Input A/B/C
Gain
Gain = + 0.0 dB
->
Gain = + 0.0 dB
PM1 N/A
-18 db
Same as PM2
:
+18 dB
3. Input A/B/C
Delay
Delay = 0.000 ms
->
Delay = 0.000 ms
PM1 N/A
000.0000mS
000.0000mS
[1 ms steps] [20.8 us steps]
400.0000mS
000.9984mS
4. Input A/B/C
EQ Byp
EQ Bypass = Off
->
EQ Bypass = Off
PM1 N/A
Off
Same as PM2
:
On
5. Input A/B/C
EQ-X (X from 1 to 5)
Byp = Off Type = Y (Y = Peaking_Eq, Hi-Shelv_Q, Lo-Shelv_Q)
->
Byp = Off
Type = Y
PM1 N/A
Off
Peaking_Eq
:
:
On
Lo-Shelv_Q
Through the PM2, it is possible to Byp the single selected filter.
Through the PM3, it is possible to select one of the 17 available
filters' type.
Once selected the filter Type and NOT in Byp mode, pressing
again the ENTER button can be accessed the selected filter's editing page.
5.1 Input A/B/C
EQ-[x] (X from 1 to 5)
->
Byp = Off
Type = Y
5.1a.
If
selected a Peaking_Eq filter, then the filter can be set by
the following parameters
Input A/B/C EQ-[x] (up to 5 filters available)
[Freq] [Gain] [Q]
->
1000Hz +0.0dB Q=1.00
[Freq.]
20Hz
[Amp.]
-12.0 dB
[Q]
0.30
:
:
:
20kHz
+12.0 dB 20.00
5.1d. If selected a Hi-Shelv_Q (variable Q High Shelving) filter,
then the filter can be set by the following parameters
Input A/B/C EQ-[x] (up to 5 filters available)
[Freq] [Gain] [Q]
->
1000Hz +0.0dB Q=1.00
[Freq.]
20Hz
[Amp.]
-12.0 dB
[Q]
0.30
:
:
:
20kHz
+12.0 dB 20.00
5.1C. If selected a Lo-Shelv_Q (variable Q Low Shelving) filter,
then the filter can be set by the following parameters
Input A/B/C EQ-[x] (up to 5 filters available)
[Freq] [Gain] [Q]
->
1000Hz +0.0dB Q=1.00
[Freq.]
20Hz
[Amp.]
-12.0 dB
[Q]
0.30
:
:
:
20kHz
+12.0 dB
20.00
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC