manualshive.com logo in svg

Marani DPA360P, User Manual, Page: 30 / 35

Share
Download
Marani DPA360P User Manual Download Page 30

 

  28 

 

To link channels when editing, you will need to select a “Master” channel that will be the one to be edited and have 
it’s parameters displayed on the LCD screen.  You can then select and link other channels (Slaves) that you wish 
to apply the same changes to.   
 
To enter a link mode session, select the Master channel Edit mode, then link the Slaves by pressing their related 
Edit buttons. 

All Linked channels will be selected ready for adjustment when their “Blue” LED is lit in the Editing mode. 
Now all Slave channels and only those selected will modify their parameters accordingly as you edit the Master 
channel. 
All other existing parameters will stay the same within the Slave Channels unless edited by this link with the 
Master channel. 

 
Note: 

The LINK function is NOT a COPY function. 

 

If we want to edit the limiter of the Output channels 1/2/4, we can enter the editing mode of Output Channel 1 by 
pressing the related Edit button and turning on the Blue LED below the Output Channel 1 LED meters.  This 
assigns the “role” of Master and displays this channel’s parameters on the LCD: 
 
 
 
 
 
 

Then press the Edit button of Output Channels 2/4, turning on their related “Blue” LED’s.  Now all parameters 
edited on Output Channel 1, will also be applied to channels 2 and 4. 
If we want to remove one of the linked channels from the Link, press the related Edit button. 
Exiting the editing of the Master channel during a Link session will automatically terminate that session.   The Link 
will also be automatically terminated if, during the editing of Output Channels you jump across to begin editing an 
Input channel or vice versa. 
 

Out-1          Name          Limiter

A: 5ms    R: 0.2s  +5.0dB

Summary of Contents for DPA360P




































Reviews:

No comments