13
Choosing the “not be shown” option means that once the unit is locked, the parameters will not be shown at all.
With this option, when trying to access a parameter, the following screen message will appear:
−
Lock Unit:
this sub-menu allows the user to lock the device so no parameters can be edited or modified.
When the Unit is in an unlocked condition, all parameters will be available for editing. When you select On, all
parameters will be locked and are not available for editing.
When you select lock from the menu, the unit will be locked and the lock menu automatically exited. The
screen will revert to the “Default” showing the current XOVER configuration and the preset selected and
beside the preset’s name a “keylock” icon indicating that the DP360P is locked.
−
User Password:
from the “User Password” sub-menu:
Press “ENTER” to access the “User Password” page:
Using the PM2 or PM3 encoders to choose a character and the NAV/PM1” encoder to move between available
locations you can enter a 6 Character Password Name.
The current position of the cursor for the characters to be entered is shown by a “blinking underscore”.
During this editing phase, the display is as follows if we were using “DPA48X” as the password:
The DP360P will exit the “Unit Lock” sub-menu and jump to the “User Password” sub-menu page screen:
If the password entered in the “Confirm Password” page matches the one entered in the “Enter Password”
page, the following screen will appear.
User Password
[DPA48X]
Confirm Password
[DPA48X]
Parameter will
not be shown *
SECURITY UTILITY
-- Lock Unit --
Lock Unit
Lock : On *
SECURITY UTILITY
-- User Password --
User Password
[ ]
SECURITY UTILITY
-- Insert Password --