manualshive.com logo in svg

Marani DPA360P, User Manual, Page: 14 / 35

Share
Download
Marani DPA360P User Manual Download Page 14

 

  12 

 

 
 
 
 
 
 

By pressing the ENTER button and then the PC Card will be properly formatted. 
 
 

Interface Utilities Sub-menu

 – this sub-menu allows you to define the remote control interface [USB, RS485 or 

TCP/IP] to be used for controlling the DP360P : 
 
 
 
 
 
. 

From “Interface Utilities”, press “ENTER” to access the Interface Setup. 
 

−

 

Interface Setup:

 this screen allows you to choose the remote control protocol for the DP360P. 

 
 
 
 
 
 

By pressing “ENTER” and then using the PM2 or PM3 encoders you can choose between the three possible 
interfaces (USB, RS4854 or TCP/IP) for the DP360P. 
Pressing ENTER on a selected source will make an asterisk appear to the right of the description on the LCD 
as in the following example which shows the selected interface as USB. 
 

 
 
 
 
 
If selected the RS485 option, using the encoders PM2/PM3 and pressing “Enter”, the possibility of setting the 
ID Number characterising the Unit during a Multi Units connection through RS485, is given turning the PM1 
counter clockwise and adjusting the ID Num to assign to the Unit, from 01 up to 32. 

 

 
 
 

 
 

Security Sub-menu

 – this sub-menu allows the User to set the parameters shown, lock the   

DP360P and set a Password therefore limiting the unit's functions and controls to those who have access to the 
appropriate Password. 
 
 
 
 
 
Press ENTER and then use the NAV/PM1 to scroll between options.   

 

−

 

Show Parameter:

 Pressing ENTER from the above menu will access the “Show Parameter” Sub Menu 

 

 
 
 
 

Press ENTER again and use the PM2 or PM3 encoders to scroll between the “be shown” and “not be shown” 
options.    An asterisk will highlight which option is selected. 
Choosing the “be shown” option means that once the unit is locked, you cannot access parameter editing 
features, but they will be displayed on the LCD screen. 

Interface Setup 

Source: USB                    * 

UTILITY MENU 

--   Interface Utilities  -- 

INTERFACE UTILITY 

--   Interface Setup   -- 

UTILITY MENU 

--   Security Utilities     --

SECURITY UTILITY 

--    Show Parameter    --

Interface Setup 

Remote ID Num = 01    * 

Card Memory not init. 

[Enter] to init         

Summary of Contents for DPA360P




































Reviews:

No comments