Once the all 3 available cursor are shown on the Frequency Response graphic, just selecting
anyone of them with the mouse's arrow and maintaining the mouse's click pressed, it is possible
to move and place the selected cursor on the desired frequency and with the desired gain.
For setting the filter's Q, still need to enter the desired value directly in the dedicated box in the
filters' editing main sub-frame.
In order to see what's the “Phase” response of the channel once set up the all filters of the EQ, it
is possible, selecting the Phase choice on the top right of the Graphic window, to turn the graphic
in “Phase Response Graphic”:
When the
Microphone
Source is selected, on the related channel is possible to adjust the Input
level from -127dB up to 0dB.
No extra gain is allowed.
When selected microphone as input, the user can chose to select on the input itself a 3bands Eq
process on the Input signal, or a Feedback Eliminator.
When the 3 bands Eq is selected, the Equalizer can be edited in the same way shown for the Line
Input case.
