2
HMI5000L Installation Guide
1010-1018 Rev 12 www.maplesystems.com
Static Awareness
Do NOT remove the rear cover of the HMI5000L Series product – doing
so will void the warranty. When the rear cover is removed the circuitry
inside is exposed to possible damage by electrostatic discharge during
handling.
Minimize the possibility of any electrostatic discharge by:
Handling the HMI at a static-free, grounded workstation.
Discharging personal static by grounding yourself prior to
handling the HMI.
Connecting the chassis ground (FG or
⏚
) connector of the HMI
to a clean earth ground.
Placing the HMI in an antistatic bag during transport.
Unpacking the Unit
Carefully unpack the HMI. Check all material in the container against the
packing list. Maple Systems will not accept responsibility for shortages
against the packing list unless notified within 30 days. The equipment
and accessories were inspected and tested by Maple Systems before
shipment. Examine the equipment carefully; if any shipping damage is
evident, notify the carrier immediately. Maple Systems is not responsible
for claim negotiations with the carrier. Save the shipping container and
packing material in case the equipment needs to be stored, returned to
Maple Systems, or transported for any reason.
Packing List
HMI5000L Series Touchscreen
Power Connector
Mounting Clamp Kit
HMI5000L Series Installation Guide
USB Stick Clamp and Spare Fuse Kit (Not on all models)
Warranty
A copy of the Warranty and Limitation of Liability is contained in the
product box. It can also be found on the Maple Systems website.
Summary of Contents for HMI5000L Series
Page 19: ......
