Montage- und Betriebsanleitung
Installation and Safety Instructions
17
EN
EExxcchhaannggiinngg tthhee iinnsseerrttss
1.
Clean to tool before beginning.
2.
Release the clamping screw with the
suitable TORX® PLUS-Screw driver, to
do this rotate the screw anti-clockwise
(see Fig. 2: Releasing the clamping
screw).
3.
Remove the clamping screw.
Releasing the clamping screw
4.
Carefully slide the insert up the insert
pocket and remove (see Fig. 3: Remo-
ving the insert).
IIN
NFFO
ORRM
MAATTIIO
ON
N
When exchanging an insert all in-
sert must be exchanged or rotat-
ed!
5.
Remove the remaining inserts.
Removing the insert
6.
Clean the insert pockets using com-
pressed air.
7.
Clean the insert pocket with cleaning
spirit, adhering to the manufacturer’s
instructions.
8.
Clean the contact area of the insert
pocket using cleaning clay.
Cleaning the insert pocket
16
Montage- und Betriebsanleitung
Installation and Safety Instructions
EN
G
Geenneerraall iinnffoorrm
maattiioonn
44..11
IIlllluussttrraattiioonn ooff aa H
Hiigghh PPeerrffoorrm
maannccee RReeaam
meerr H
HPPRR440000 pplluuss
LLeeggeenndd
1
|
Indexable insert
2 |
Clamping screw
(TORX® PLUS)
3 |
Cleaning groove
4 |
Insert pocket
Individual components
TToooollss aanndd eeqquuiippm
meenntt rreeqquuiirreedd
•
TORX® PLUS-Screw driver (tool diameter < 63 mm: 8 IP
and tool diameter
≥
63 mm: 15 IP)
•
TORX® PLUS-Torque wrench
•
High pressure pistol
Montage- und Betriebsanleitung
Installation and Safety Instructions
16
EN
