8
MAP Pilot Data Harness
– P/N MP-ECMA01S
The
MAP Data Harness
serves two functions on the MAP Pilot:
•
It provides
feedback
from the rudder position sensor of your vessel.
•
It allows you to
configure
the MAP Pilot through your device.
Fig. 4: MAP data harness
As shown in Fig. 4, the power cable
consists of 2 connector heads,
detailed in Table 2. For further
information on the wire pinouts of
the harness, refer to
Table 2: MAP data harness connector heads
Connector Label
Connector P/N
Contact P/N
MA2
M12
8-pin male
P3
Deutsch DTM04-4P Deutsch 0460-202-20141
P4
Deutsch DTM06-4S
Deutsch 0462-201-20141
Table 3: Wiring pinouts for the MAP data harness
Cable Description Connector A Label
Wire colors
Connector B Label Pin B #
Setup
MA2
P3
1
2
3
4
Feedback
P4
1
3
4
