Mantracourt Electronics Limited
T24-PR1 User Manual
13
This parameter is Non Volatile and is stored in internal flash memory each
time the <LOG> token is evaluated in a printout. This takes time and reduces
the finite life of the flash memory so it is recommended that printouts
containing the <LOG> token are not triggered at a rate faster than every 30
seconds.
Log Digits
Set the number of digits to display when the <LOG> token is decoded.
Example: If this is set to 2 then the log number will count up to 99 before
resetting.
Line Delay Char
This is not alterable and is the character used by the thermal printer to
denote the end of a line. You will see the token <0A> in the Output Design
page when you press the enter key at the end of a line.
Line Delay
This is not alterable but shows the delay in milliseconds required at the end of
each printed line.
