9
Drive Assembly
Drive Assembly
STEP 7:
Drive Handle Assembly
Select:
g
1 Drive Handle (item 20)
g
1 Grip (item 26)
g
1 Grip Cap (item 27)
g
1 #6 Screw (item 28)
A.
Slide the Grip onto the end of the Drive Handle.
B.
Push the stem of the Grip Cap into the end of the
Drive Handle, aligning the holes.
C.
Secure the Grip Cap to the end of the Drive Handle with the #6 Screw.
Tighten the Screw until just snug. Note: The head of the Screw will be
in the hole of the Drive Handle, locking the Grip Cap in position.
STEP 8:
Gear Drive Assembly
Select:
g
1 Drive Support (item 19)
g
1 Drive Gear (item 24)
g
1 Drive Handle Assembly (from step 7)
g
1 Cotter Pin (item 25)
A.
Push the Drive Gear through the tube in the Drive
Support with the Gear on the inside of the Support.
B.
Insert the bar of the Drive Handle through
the Drive Gear.
C.
Slide the Cotter Pin through the hole in the end
of the Drive Handle bar.
D.
Use pliers to bend the legs of the Cotter Pin
to keep it in place.
